The body shall be steel, finished full polyester non-yellowing satin white (RAL9016). The luminaire shall be suitable for surface installation, with BESA fixings on 605mm centres. It shall also have a conduit entry in the centre of the luminaire back. The luminaire shall be 200mm wide, which is ideal for retrofit applications. It shall be available in both 1200mm and 1500mm nominal lengths.
The end caps shall be moulded polycarbonate, with concealed screw fixings. Conduit entry points shall be available under removeable covers.
Two diffuser versions shall be offered, a nano-prism optic for LG7:2015 compliance, or polycarbonate opal. Both shall offer sideways/upward output to light the ceiling.
LED light engine providing 63,000 hour life (L80/B10), 4000K, CRI 80+ and shall offer performance protection. Efficiency shall be greater than 130LL/CW. The luminaire shall use a patented current sharing PCB and circuit design philosophy. If an LED fails then its current is shared via neighbouring circuits, with each LED’s brightness increasing slightly to compensate. This shall ensure that a luminaire continues to provide its designed lumen performance, even in the case of nuisance LED failures, and reduces the maintenance costs of a project.
Control gear and LED light engine replaceable for future maintenance.
Global
Deutschland
France
Ireland
UAE الإمارات العربية المتحدة
United Kingdom
